<?xml version='1.0' encoding='UTF-8'?>
<metadata>
  <idinfo>
    <citation>
      <citeinfo>
        <origin>U.S. Geological Survey</origin>
        <origin>USDA Forest Service</origin>
        <pubdate>20260623 </pubdate>
        <title>Burned Area Reflectance Classification assessment of Fire ID - wa4627612031420260614 </title>
        <geoform>raster digital data</geoform>
        <othercit>https://doi.org/10.5066/P97UMU6K</othercit>
        <onlink>https://burnseverity.cr.usgs.gov/products/baer</onlink>
      </citeinfo>
    </citation>
    <descript>
      <abstract>These data products are preliminary burn severity assessments derived from Sentinel-2C data. The pre-fire and post-fire subsets included were used to create a differenced Normalized Burn Ratio (dNBR) image. The dNBR image attempts to portray the variation of burn severity within a fire. The severity ratings are influenced by the effects to the canopy.  The severity rating is based upon a composite of the severity to the understory (grass, shrub layers), midstory trees and overstory trees. Because there is often a strong correlation between canopy consumption and soil effects, this algorithm works in many cases for BAER teams whose objective is a soil burn severity assessment.  It is not, however, appropriate in all ecosystems or fires. It is expected that BAER teams will adjust the thresholds to match field observations to produce a soil burn severity. </abstract>
      <purpose>These data were created by the eros to support Burned Area Emergency Response (BAER) teams. </purpose>
      <supplinf>The EventID is generated by combining several attributes taken from the fire ignition location and start date. The EventID is constructed from the two-letter state abbreviation, the decimal degree latitude and longitude, both carried to the third decimal place without the decimal point (if less than 100 degrees the longitude is padded with a leading '0'), and the start date formatted as YYYYMMDD (e.g., TX2672909780020110102).

Fire Information 
Event ID: wa4627612031420260614
Fire Name: 4170 TULE RD
Date of Fire: June 14, 2026
Type of Assessment: differenced Normalized Burn Ratio
Acres within Fire Perimeter: 24094

Pre-Fire Sensor, Date, Scene ID: Sentinel-2A, 2026-06-04, A10TGS20260604_20m
Post-Fire Sensor, Date, Scene ID: Sentinel-2C, 2026-06-22, C10TGS20260622_20m

See https://burnseverity.cr.usgs.gov/products/baer or project information and data access. 
Refer to https://burnseverity.cr.usgs.gov/contact for additional support. </supplinf>
    </descript>
    <timeperd>
      <timeinfo>
        <sngdate>
          <caldate>June 14, 2026 </caldate>
        </sngdate>
      </timeinfo>
      <current>ground condition</current>
    </timeperd>
    <status>
      <progress>Complete</progress>
      <update>Quarterly or As needed</update>
    </status>
    <spdom>
      <bounding>
        <westbc>-120.43339 </westbc>
        <eastbc>-120.24085 </eastbc>
        <northbc>46.28039 </northbc>
        <southbc>46.17227 </southbc>
      </bounding>
    </spdom>
    <keywords>
      <theme>
        <themekt>ISO 19115 Topic Category</themekt>
        <themekey>imageryBaseMapsEarthCover</themekey>
      </theme>
      <theme>
        <themekt>None</themekt>
        <themekey>Wildfire</themekey>
        <themekey>Differenced normalized burn ratio</themekey>
        <themekey>Wildland fire</themekey>
        <themekey>Normalized burn ratio</themekey>
        <themekey>Burned Area Emergency Response</themekey>
        <themekey>BAER</themekey>
        <themekey>Burned area</themekey>
        <themekey>Burn severity</themekey>
        <themekey>Fire location</themekey>
        <themekey>Location</themekey>
        <themekey>Sentinel-2C</themekey>
      </theme>
      <place>
        <placekt>none</placekt>
        <placekey>eros</placekey>
        <placekey>4170 TULE RD Fire</placekey>
      </place>
    </keywords>
    <accconst>Thresholded, preliminary severity estimates (BARC4 and BARC256) are only delivered to BAER teams. Further distribution is at the discretion of the BAER team leader. Pre-imagery, post-imagery, and unthresholded data may be publicly available on https://burnseverity.cr.usgs.gov/products/baer or https://burnseverity.cr.usgs.gov/baer/baer-imagery-support-data-download. Access to pre-imagery and post-imagery may be limited when sensors other than Landsat or other government remote sensing assets are used due to product licensing restrictions. </accconst>
    <useconst>There are no restrictions on use, except for reasonable and proper acknowledgement of information sources and limitations as preliminary/draft data. </useconst>
    <ptcontac>
      <cntinfo>
        <cntorgp>
          <cntorg>U.S. Geological Survey</cntorg>
        </cntorgp>
        <cntpos>MTBS Project Manager</cntpos>
        <cntaddr>
          <addrtype>mailing and physical</addrtype>
          <address>47914 252nd Street</address>
          <city>Sioux Falls</city>
          <state>SD</state>
          <postal>57198</postal>
          <country>US</country>
        </cntaddr>
        <cntvoice>800-252-4547</cntvoice>
        <cntemail>burnseverity@usgs.gov</cntemail>
      </cntinfo>
    </ptcontac>
    <datacred>U.S. Geological Survey and USDA Forest Service</datacred>
    <native>QGIS and GDAL</native>
  </idinfo>
  <dataqual>
    <attracc>
      <attraccr>BARC Mapping analysts examine the differenced Normalized Burn Ratio (dNBR) image for each fire in the context of remote sensing spectral data and any ancillary information available to the analyst. dNBR image data for each fire are thresholded into classes representing unburned areas; areas of low, moderate, high burn severities; and areas of increased vegetation response. Analysts follow guidelines established by subject matter experts to maintain consistency in discerning burn severity thresholds from fire to fire and minimize subjectivity. </attraccr>
    </attracc>
    <logic>No tests for logical consistency have been performed on this map layer. </logic>
    <complete>Data completeness reflects the availability of fire occurrence information and/or availability of suitable imagery (including Landsat TM, Landsat ETM+, Landsat OLI, Sentinel 2A, and Sentinel 2B). </complete>
    <posacc>
      <horizpa>
        <horizpar>Each image used to create the burn severity assessment (utilizing Landsat TM, Landsat ETM+, Landsat OLI, Sentinel 2A, and Sentinel 2B), was precision terrain-corrected using 3-arc-second digital terrain elevation data, and Geo registered using ground control points. This resulted in a root mean square registration error of less than 1 pixel (30-meters). </horizpar>
      </horizpa>
      <vertacc>
        <vertaccr>N/A</vertaccr>
      </vertacc>
    </posacc>
    <lineage>
      <procstep>
        <procdesc>These data products are derived from Sentinel-2C data. Pre-fire and post-fire scenes are analyzed to create a differenced Normalized Burn Ratio (dNBR) image. The dNBR image portrays the variation of burn severity within the fire. The pre- and post-fire images are terrain corrected and further processed to convert top of atmosphere reflectance (band order (1-6): B, G, R, NIR, SWIR-1, SWIR-2). 

The Normalized Burn Ratio (NBR) is computed for the pre- and post-fire images using the following formula: (NIR Band - SWIR Band) / (NIR Band + SWIR Band) = NBR. The Differenced NBR is computed to determine severity by subtracting the post-fire NBR from the pre-fire NBR: (PreNBR - PostNBR) = dNBR.

The BARC products are a generalization of the raw, continuous dNBR dataset. Both BARC products have been resampled to unsigned 8-bit Geo TIFF and are easily viewed and edited within ArcGIS.

The classes represented on the BARC products are created with thresholds chosen by an analyst at EROS.  These thresholds can be roughly related back to original dNBR values by multiplying by 5 and then subtracting 275 (for example, a BARC256 value of 100 would relate to a dNBR value of 225).  The BARC thresholds used on this fire are: Unburned / Undetectable: All values less than or equal to 64. Low: All values greater than 64 and less than or equal to 131. Moderate: All values greater than 131 and less than or equal to 198. High: All values greater than 198.

General descriptions of the severity classes are below: Unburned / Undetectable: This means the area after the fire was indistinguishable from pre-fire conditions. This does not always indicate the area did not burn (i.e., canopy may be occluding the burn signal). Low: This severity class represents areas of surface fire with little detected change in cover and little detected mortality of the dominant vegetation. Moderate: This severity class is between low and high and means there is a mixture of detected effects on the dominant vegetation. High: This severity class represents areas where the canopy has high to complete consumption. </procdesc>
        <procdate>20260623 </procdate>
      </procstep>
    </lineage>
  </dataqual>
  <spdoinfo>
    <direct>Raster</direct>
    <rastinfo>
      <rasttype>Grid Cell</rasttype>
      <rowcount>407 </rowcount>
      <colcount>489 </colcount>
      <vrtcount>1</vrtcount>
    </rastinfo>
  </spdoinfo>
  <spref>
    <horizsys>
      <planar>
        <mapproj>
          <mapprojn>WGS 84 / UTM zone 10N </mapprojn>
          <albers>
            <stdparll>0.0 </stdparll>
            <stdparll>0.0 </stdparll>
            <longcm>-123.0 </longcm>
            <latprjo>0.0 </latprjo>
            <feast>500000.0 </feast>
            <fnorth>0.0 </fnorth>
          </albers>
        </mapproj>
        <planci>
          <plance>row and column</plance>
          <coordrep>
            <absres>30 </absres>
            <ordres>30 </ordres>
          </coordrep>
          <plandu>meters</plandu>
        </planci>
      </planar>
      <geodetic>
        <horizdn>WGS_1984 </horizdn>
        <ellips>WGS 84 </ellips>
        <semiaxis>NA </semiaxis>
        <denflat>NA </denflat>
      </geodetic>
    </horizsys>
  </spref>
  <eainfo>
    <detailed>
      <enttyp>
        <enttypl>Fire perimeter shapefile</enttypl>
        <enttypd>Table containing attribute information associated with the dataset. </enttypd>
        <enttypds>Producer Defined</enttypds>
      </enttyp>
      <attr>
        <attrlabl>FID</attrlabl>
        <attrdef>Internal feature number. </attrdef>
        <attrdefs>ESRI</attrdefs>
        <attrdomv>
          <udom>Sequential unique whole numbers that are automatically generated. </udom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>Shape</attrlabl>
        <attrdef>Feature geometry. </attrdef>
        <attrdefs>ESRI</attrdefs>
        <attrdomv><udom>Coordinates defining the features. </udom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>Event_ID</attrlabl>
        <attrdef>Event ID. </attrdef>
        <attrdefs>Producer Defined</attrdefs>
        <attrdomv><udom>The Event-ID is generated by combining several attributes taken from the fire ignition location and start date. The Event-ID is constructed from the two-letter state abbreviation, the decimal degree latitude and longitude, both carried to the third decimal place without the decimal point (if less than 100 degrees the longitude is padded with a leading '0'), and the start date formatted as YYYYMMDD (e.g., TX2672909780020110102). </udom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>irwinID</attrlabl>
        <attrdef>IRWIN ID. </attrdef>
        <attrdefs>IRWIN Defined</attrdefs>
        <attrdomv><udom>The IRWIN ID is a unique identifier created by the Integrated Reporting of Wildland-Fire Information (IRWIN) service. Example: 5DF6471C-07B0-4EA0-8188-4F83B18A47F8. </udom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>Incid_Name</attrlabl>
        <attrdef>Name of fire (UNNAMED if not identifiable from source fire occurrence databases). </attrdef>
        <attrdefs>Producer Defined</attrdefs>
        <attrdomv><udom>Example: Tank Hollow</udom>
        </attrdomv>
      </attr>
      <attr>
  <attrlabl>Incid_Type</attrlabl><attrdef>Documented type of fire (WF: Wildfire, Rx: Prescribed Fire; UNK:Unknown). </attrdef><attrdefs>Producer Defined</attrdefs><attrdomv>
    <edom>
      <edomv>Wildfire</edomv>
      <edomvd>An unplanned, unwanted wildland fire including unauthorized human-caused fires, escaped wildland fire use events, escaped prescribed fire projects, and all other wildland fires where the objective is to put the fire out.</edomvd>
      <edomvds>Producer defined</edomvds>
    </edom>
  </attrdomv>
  <attrdomv>
    <edom>
      <edomv>Prescribed fire</edomv>
      <edomvd>Any fire intentionally ignited by management actions in accordance with applicable laws, policies, and regulations to meet specific objectives.</edomvd>
      <edomvds>Producer defined</edomvds>
    </edom>
  </attrdomv>
  <attrdomv>
    <edom>
      <edomv>Wildland fire use</edomv>
      <edomvd>An event dealing with the management of a naturally ignited wildland fire to accomplish specific pre-stated resource management objectives in predefined geographic areas outlined in the Fire Management Plans.</edomvd>
      <edomvds>Producer defined</edomvds>
    </edom>
  </attrdomv>
  <attrdomv>
    <edom>
      <edomv>Unknown</edomv>
      <edomvd>A fire event whose incident type was not reported from the original reporting agency.</edomvd>
      <edomvds>Producer defined</edomvds>
    </edom>
  </attrdomv>
  <attrdomv>
    <edom>
      <edomv>Out of area response</edomv>
      <edomvd>Multiple resource response to a wildfire incident. This term applies exclusively to wildfire incidents.</edomvd>
      <edomvds>Producer defined</edomvds>
    </edom>
  </attrdomv>
  <attrdomv>
    <edom>
      <edomv>Complex</edomv>
      <edomvd>Two or more individual incidents located in the same general area which are assigned to a single incident commander or unified command.</edomvd>
      <edomvds>Producer defined</edomvds>
    </edom>
  </attrdomv>
</attr>
      <attr>
        <attrlabl>Map_ID</attrlabl>
        <attrdef>Mapping ID. </attrdef>
        <attrdefs>Producer Defined</attrdefs>
        <attrdomv><rdom>
            <rdommin>1</rdommin>
            <rdommax>99999999</rdommax>
          </rdom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>Map_Prog</attrlabl>
        <attrdef>Mapping program/protocol the fire was mapped with. </attrdef>
        <attrdefs>Producer Defined</attrdefs>
        <attrdomv><udom>Examples: MTBS, RAVG, BAER, NPS, Prairie</udom>
        </attrdomv>
      </attr>
      <attr>
  <attrlabl>Asmnt_Type</attrlabl><attrdef>Fire mapping assessment label (Initial (SS) (SS=single scene), Initial, Extended, Extended (SS) (SS=single scene), Emergency, or Emergency (SS)). </attrdef><attrdefs>Producer Defined</attrdefs><attrdomv>
    <edom>
      <edomv>Initial</edomv>
      <edomvd>Imagery acquired shortly after fire containment.</edomvd>
      <edomvds>Producer defined</edomvds>
    </edom>
  </attrdomv>
  <attrdomv>
    <edom>
      <edomv>Initial (SS)</edomv>
      <edomvd>Imagery acquired shortly after fire containment. No pre-fire image was available; assessment based on NBR.</edomvd>
      <edomvds>Producer defined</edomvds>
    </edom>
  </attrdomv>
  <attrdomv>
    <edom>
      <edomv>Extended</edomv>
      <edomvd>Imagery acquired during seasonal peak-of-green after fire containment.</edomvd>
      <edomvds>Producer defined</edomvds>
    </edom>
  </attrdomv>
  <attrdomv>
    <edom>
      <edomv>Extended (SS)</edomv>
      <edomvd>Imagery acquired during seasonal peak-of-green after fire containment. No pre-fire image was available; assessment based on NBR.</edomvd>
      <edomvds>Producer defined</edomvds>
    </edom>
  </attrdomv>
  <attrdomv>
    <edom>
      <edomv>Emergency</edomv>
      <edomvd>Imagery acquired during active incident or immediately after fire containment.</edomvd>
      <edomvds>Producer defined</edomvds>
    </edom>
  </attrdomv>
  <attrdomv>
    <edom>
      <edomv>Emergency (SS)</edomv>
      <edomvd>Imagery acquired during active incident or immediately after fire containment. No pre-fire image was available; assessment based on NBR.</edomvd>
      <edomvds>Producer defined</edomvds>
    </edom>
  </attrdomv>
</attr>
      <attr>
        <attrlabl>BurnBndAc</attrlabl>
        <attrdef>Number of acres mapped. </attrdef>
        <attrdefs>Producer Defined</attrdefs>
        <attrdomv><rdom>
            <rdommin>1</rdommin>
            <rdommax>1183539</rdommax>
          </rdom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>BurnBndLat</attrlabl>
        <attrdef>Latitude of the mapped centroid of fire perimeter. </attrdef>
        <attrdefs>Producer Defined</attrdefs>
        <attrdomv><rdom>
            <rdommin>17.957</rdommin>
            <rdommax>70.139</rdommax>
          </rdom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>BurnBndLon</attrlabl>
        <attrdef>Longitude of the mapped centroid of fire perimeter. </attrdef>
        <attrdefs>Producer Defined</attrdefs>
        <attrdomv><rdom>
            <rdommin>-165.881</rdommin>
            <rdommax>-65.35</rdommax>
          </rdom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>Ig_Date</attrlabl>
        <attrdef>Date of fire ignition (from source fire occurrence databases). </attrdef>
        <attrdefs>Producer Defined</attrdefs>
        <attrdomv><udom>Example: 9/30/1992</udom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>Pre_ID</attrlabl>
        <attrdef>Landsat or Sentinel pre scene ID. </attrdef>
        <attrdefs>Producer Defined</attrdefs>
        <attrdomv><udom>Example: 503803520040723</udom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>Post_ID</attrlabl>
        <attrdef>Landsat or Sentinel post scene ID. </attrdef>
        <attrdefs>Producer Defined</attrdefs>
        <attrdomv><udom>Example: 701503620081007</udom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>Perim_ID</attrlabl>
        <attrdef>Landsat or Sentinel perimeter scene ID. Used to help delineate perimeter of an Extended or Extended (SS) assessment. Not always utilized, sometimes field will be populated, other times not. </attrdef>
        <attrdefs>Producer Defined</attrdefs>
        <attrdomv><udom>Example: A15RVQ20190514</udom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>dNBR_offst</attrlabl>
        <attrdef>The mean dNBR value sampled from an unburned area outside the fire perimeter. </attrdef>
        <attrdefs>Producer Defined</attrdefs>
        <attrdomv>
          <edom>
  <edomv>-9999 or 9999</edomv>
  <edomvd>No Data</edomvd>
  <edomvds>Producer defined</edomvds>
</edom>
        </attrdomv>
        <attrdomv><rdom>
            <rdommin>-9999</rdommin>
            <rdommax>9999</rdommax>
          </rdom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>dNBR_stdDv</attrlabl>
        <attrdef>The standard deviation of the mean dNBR value sampled from an unburned area outside the fire perimeter. </attrdef>
        <attrdefs>Producer Defined</attrdefs>
        <attrdomv>
          <edom>
  <edomv>-9999 or 9999</edomv>
  <edomvd>No Data</edomvd>
  <edomvds>Producer defined</edomvds>
</edom>
        </attrdomv>
        <attrdomv><rdom>
            <rdommin>-9999</rdommin>
            <rdommax>9999</rdommax>
          </rdom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>NoData_T</attrlabl>
        <attrdef>No data threshold (in dNBR index values; NBR index units for single scene assessments). </attrdef>
        <attrdefs>Producer Defined</attrdefs>
        <attrdomv>
          <edom>
  <edomv>-9999 or 9999</edomv>
  <edomvd>No Data</edomvd>
  <edomvds>Producer defined</edomvds>
</edom>
        </attrdomv>
        <attrdomv><rdom>
            <rdommin>-9999</rdommin>
            <rdommax>9999</rdommax>
          </rdom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>IncGreen_T</attrlabl>
        <attrdef>Increased greenness threshold (in dNBR index values; NBR index units for single scene assessments). </attrdef>
        <attrdefs>Producer Defined</attrdefs>
        <attrdomv>
          <edom>
  <edomv>-9999 or 9999</edomv>
  <edomvd>No Data</edomvd>
  <edomvds>Producer defined</edomvds>
</edom>
        </attrdomv>
        <attrdomv><rdom>
            <rdommin>-9999</rdommin>
            <rdommax>9999</rdommax>
          </rdom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>Low_T</attrlabl>
        <attrdef>Unburned/Low threshold (in dNBR index values; NBR index units for single scene assessments). </attrdef>
        <attrdefs>Producer Defined</attrdefs>
        <attrdomv>
          <edom>
  <edomv>-9999 or 9999</edomv>
  <edomvd>No Data</edomvd>
  <edomvds>Producer defined</edomvds>
</edom>
        </attrdomv>
        <attrdomv><rdom>
            <rdommin>-9999</rdommin>
            <rdommax>9999</rdommax>
          </rdom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>Mod_T</attrlabl>
        <attrdef>Low/Moderate burn severity threshold (in dNBR index values; NBR index units for single scene assessments). </attrdef>
        <attrdefs>Producer Defined</attrdefs>
        <attrdomv>
          <edom>
  <edomv>-9999 or 9999</edomv>
  <edomvd>No Data</edomvd>
  <edomvds>Producer defined</edomvds>
</edom>
        </attrdomv>
        <attrdomv><rdom>
            <rdommin>-9999</rdommin>
            <rdommax>9999</rdommax>
          </rdom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>High_T</attrlabl>
        <attrdef>Moderate/High burn severity threshold (in dNBR index values; NBR index units for single scene assessments). </attrdef>
        <attrdefs>Producer Defined</attrdefs>
        <attrdomv>
          <edom>
  <edomv>-9999 or 9999</edomv>
  <edomvd>No Data</edomvd>
  <edomvds>Producer defined</edomvds>
</edom>
        </attrdomv>
        <attrdomv><rdom>
            <rdommin>-9999</rdommin>
            <rdommax>9999</rdommax>
          </rdom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>Comment</attrlabl>
        <attrdef>As needed comments or notes provided by the mapping analyst to the end user. </attrdef>
        <attrdefs>Producer Defined</attrdefs>
        <attrdomv><udom>Comments as needed</udom>
        </attrdomv>
      </attr>
    </detailed>
  </eainfo>
  <distinfo>
    <distrib>
      <cntinfo>
        <cntorgp>
          <cntorg>U.S. Geological Survey</cntorg>
          <cntper>GS ScienceBase</cntper>
        </cntorgp>
        <cntaddr>
          <addrtype>mailing address</addrtype>
          <address>Denver Federal Center, Building 810, Mail Stop 302</address>
          <city>Denver</city>
          <state>CO</state>
          <postal>80225</postal>
          <country>United States</country>
        </cntaddr>
        <cntvoice>1-888-275-8747</cntvoice>
        <cntemail>sciencebase@usgs.gov</cntemail>
      </cntinfo>
    </distrib>
    <distliab>Unless otherwise stated, all data, metadata and related materials are considered to satisfy the quality standards relative to the purpose for which the data were collected. Although these data and associated metadata have been reviewed for accuracy and completeness and approved for release by the U.S. Geological Survey (USGS), no warranty expressed or implied is made regarding the display or utility of the data for other purposes, nor on all computer systems, nor shall the act of distribution constitute any such warranty. </distliab>
    <stdorder>
      <digform><digtinfo>
          <formname>Digital Data</formname>
        </digtinfo>
        <digtopt><onlinopt><computer><networka><networkr>https://doi.org/10.5066/P97UMU6K</networkr></networka></computer></onlinopt></digtopt></digform>
      <fees>None</fees>
    </stdorder>
  </distinfo>
  <metainfo>
    <metd>20260623 </metd>
    <metc>
      <cntinfo>
        <cntorgp>
          <cntorg>U.S. Geological Survey</cntorg>
        </cntorgp>
        <cntpos>MTBS Project Manager</cntpos>
        <cntaddr>
          <addrtype>mailing and physical</addrtype>
          <address>47914 252nd Street</address>
          <city>Sioux Falls</city>
          <state>SD</state>
          <postal>57198</postal>
          <country>US</country>
        </cntaddr>
        <cntvoice>800-252-4547</cntvoice>
        <cntemail>burnseverity@usgs.gov</cntemail>
      </cntinfo>
    </metc>
    <metstdn>FGDC Content Standard for Digital Geospatial Metadata</metstdn>
    <metstdv>FGDC-STD-001-1998</metstdv>
  </metainfo>
</metadata>
